Desk Edge Clamp

For desks or platforms up to a thickness of approx. 35mm. The footprint is just 60mm x 60mm D-shape and the clamp tightening screw has a 8mm Hex socket. A circular location pad is supplied to protect the platform surface.
Standard post height is 67mm with an optional taller 134mm post available on request.
If a larger thickness platform clamp is required please enquire for our alternatives.

Through Desk Fitting

Requires a 10mm hole in the desk or platform. Provides a sturdy mounting solution. Supplied with standard 60mm diameter clamping plates for platforms up to 30mm thick.
The standard post height is 67mm with an optional taller 134mm post available (shown on the right).
Options for other desk thicknesses also available on request.

Wall Plate Mounting

Flat square shape bracket attaches to the wall through four fixing holes situated at each corner.
It is important to ensure that the wall and fixings used (not supplied) are appropriate for the application.

Bulkhead Mounting

L-shape bracket attaches to a bulkhead (or wall) and the post obscures the fittings.
Standard post height is 67mm with an optional taller 134mm post available.
It is important to ensure that the fixings used (not supplied) are appropriate for the application.

Slatted Wall Fitting

A mounting solution to fit onto a slatted wall or partition.
Enquire on compatablity with your particular slatted wall furniture.

Care must be taken to ensure that the desk/platform and frame is of sufficient strength for the intended use and that the appropriate fitting is used.